Gas Powered Hot Water Heat Pump
Product Concept
Specifications (HEWH-500AS):
- 300,000-600,000 Btu/hr Heat Output
- Engine (<50 HP)
- 2.5 L FORD 4-Cylinder
- Natural Gas or Propane Fuel
- Ultra Low Emissions
- Small 5 kW generator for electrical parasitic load
- Electrical Requirement 115/60/15A similar to household appliance
- Control power & battery charging
- Cogenerates parasitic load for pump and fans
- NO COSTLY 3-PHASE POWER SERVICE NEEDED
- Electrical Requirement 115/60/15A similar to household appliance
- Next-generation control system
- Internet-Based
- Touch-screen display
- Advanced communications (CAN)
- Efficient, low-pressure, HFC-134a refrigerant
Coefficient of Performance
Source Efficiency Comparison
Applications:
- Domestic Hot Water
- Pool Heating
- Laundry / Food Prep
- Process Heating
- Food / Beverage
- Manufacturing
- Desiccant Regeneration
- Summer Reheat (Humidity Control)
Building Types:
- Hotels
- Condos
- Correctional Facilities
- Nursing Homes
- Hospitals
- Spa / Health Clubs
- Universities
- Manufacturing Facilities
Emissions Development
Environmental Benefits:
- 50% reduction in carbon footprint
- Save 100 tons of carbon annually at typical installations
- Exceed clean emissions standards throughout the US including California
- Ultra low emissions with near zero criteria pollutants
External Dimensions
Connection Table
Below is a screenshot of the unit running at full load producing 130° F hot water at 90° F ambient in Boston on 7/19/13 in our factory test cell. As you can see, the unit is putting out 650,000 Btu/hr of heat with a gas input of only 289,577 Btu/hr. This provides a COP = 650,000/289,577 = 2.25. This is 3x the efficiency of typical gas boilers!
DOWNLOAD: PDF Spec Sheet
